Night Vision Scope Clip-on. Convert your standard scope into a night vision scope in minutes.
Cleary identify prey at night out to 150+ yards. Includes Long Range 850Nm IR illuminator 4.3" LCD targeting screen displays scope’s field of view
The best preditors hunt in the dark of night, now you can too! Giving off just a faint red glow, this scope clip-on enables you to identify hogs, coyote, fox or other animals you are hunting 150+ yards away. They think they have the advantage of darkness but you will see them clear as day. Use it in the day light or night. Included is an RCA video output port that you can plug into a DVR for recording footage in light or dark. A 4.3" LCD screen and illuminator module displays clear images and makes it extremely easy to find your target. Fits virtually any size scope up to 50mm eyepiece. The rechargeable light weight polymer lithium-ion battery will run for 5+ hour on one charge and is easily replace with a spare without any tools. Total weight: 22 oz. with battery
Camera: Image Sensor 1/3 CMOS Sensor Image Sensor CMOS 1099 Horizontal Resolution 1000TVL Signal System: Standard NTSC Day / Night Mode Color to Black-white Min. illumination 0.01Lux/ F 1.2 (IR ON) Video Output 1.0Vp- p75 1000 TVL (television lines) IR CMOS Operating Temperature -20° C~+60° C Lens: 16mm f1.2 large format IR Illuminator: Rail mountable, Focusable long range. Includes battery and re-charger Illuminator Emitter: High Power 850nm Oslon Black Battery: 3000ahM 12 volt Super Polymer Lithium-ion LCD size: 4.3 inch
Eyepiece: 3 inch (add about 2 inches to length of scope). Rubber housing with screw clamp to tighten on scope.
Power Pack: Canvas Molly bag with Velcro straps to attach scope or stock. Four pole video plugs to attach to eyepiece and LCD with 2 feet of available cable stored in bag. Two power plugs and one RCA video out plug.