Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
Marlboroman71818, LADD3, Karl, the Greatest, Leonard Blackburn, TXSportsman82
63600 Registered Users
Top Posters
dogcatcher 87037
stxranchman 52562
bill oxner 46151
RWH24 44568
rifleman 44356
BOBO the Clown 43467
BMD 40835
Big Orn 37484
txshntr 35148
SnakeWrangler 34887
facebook
Forum Stats
63600 Members
45 Forums
451153 Topics
6233931 Posts

Max Online: 16728 @ 03/25/12 08:51 AM
Topic Options
#6092331 - 12/19/15 02:45 PM Vertical Stringing Question
Furb Offline
Pro Tracker

Registered: 09/06/05
Posts: 1798
Loc: Arlington, TX
So my 6.8 is vertical stringing, not bad, still under 1" top to bottom on the 5 shot group. ES is about 80 FPS also. Question is would you worry about tweaking the load to eliminate the stringing or just let it be, gun as a 20" AR15. Target is the one on the right.



Side note, the new lot of Varget I got seemed to tighten up the 308 grouping plus added about 30FPS with no pressure signs. Previous best group was around .479". 4 shot group because I only 5 rounds and not 6 so the one off to the side is the fouler/Cold Bore round.
_________________________
HHUUMMMM, what to write, what to write, I got nothing.

Top
#6092350 - 12/19/15 03:14 PM Re: Vertical Stringing Question [Re: Furb]
RiverRider Online   content
THF Trophy Hunter

Registered: 11/11/07
Posts: 7975
Loc: Wise Co.
I'd shoot it at 200 yards or further if I had the place to do it. You might be surprised, or you might be aghast. The truth is you're not going to miss your target at 100 yards with a load shooting like that. If you shoot at 200 or further, though, it might be a different story.

There's some tricky stuff about how barrel harmonics treat trajectories with barrel time variations (as in velocity spread). It is possible to have virtually NO vertical spread at one distance while having several inches of vertical spread at another distance, with the very same load.
_________________________


I'm here to give and receive knowledge, not affirmation or adoration. If you don't like it, mierda dura. Intellectual honesty is not for fragile egos.

Top
#6092397 - 12/19/15 04:00 PM Re: Vertical Stringing Question [Re: Furb]
Big Fitz Offline
Veteran Tracker

Registered: 12/06/09
Posts: 2412
Loc: Prosper, TX
You might check out the below topic where Chad mentioned some very interesting stringing issues he has experienced with ARs.

AR Shot Stringing by Chad
_________________________
Originally Posted By: syncerus
I prefer to think of myself as a control enthusiast. wink

Top
#6092423 - 12/19/15 04:24 PM Re: Vertical Stringing Question [Re: Furb]
FiremanJG Online   content
THF Celebrity

Registered: 12/16/08
Posts: 24586
Loc: Wolfe City, TX
ES of 80, and a vertical string like that, I'd rework the load. And as River Rider suggested, I'd do it farther than 100 yards. Chad likes to use 200, I like 300+, to each his own.
_________________________

800 Yard Steel Range
Precision Rifle Instruction
Memberships and Classes Available

Top
#6092556 - 12/19/15 06:09 PM Re: Vertical Stringing Question [Re: FiremanJG]
Tactical Cowboy Offline
Extreme Tracker

Registered: 08/23/11
Posts: 3503
Loc: Snyder
Originally Posted By: FiremanJG
ES of 80, and a vertical string like that, I'd rework the load. And as River Rider suggested, I'd do it farther than 100 yards. Chad likes to use 200, I like 300+, to each his own.


Agree 100%
_________________________
The secret to a long life is to try not to shorten it

Powder coated cast bullets available. https://www.facebook.com/lazyhbullets/

Top



© 2004-2018 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide