Ok, so there has been some talk on here about the inserts I've been making. I've sold to every state, but Texas leads the way by far. Might as well put them up here so you all don't have to track them down thru other sites.
Works to reduce powder overthrows when using extruded powders like Varget and makes for uniform charge weights. The insert reduces the diameter of the discharge to from .310 to .245. Available in brass or aluminum, no difference in function between the two materials. $12.00 ea and $10 for each additional insert. Price includes shipping. Pm for details.
I've sold hundreds of these and guys love them.
*Measure your discharge tube- If you have an older Chargemaster, it may have a smaller tube inside diameter in the .265 range. Make a note of this so I can spin one down to fit. 99% are in the .310+ range but its best to measure to be sure. The best way to measure is lock your calipers at .310 and see if they fit. If not, lock them at .308 and check, and so on. Find the smallest number that will fit and give me that. Another way to check is see if a .308 cal bullet will fit in the tube. All inserts are a few thousands undersized for a universal fit and you will add just a small piece of scotch tape or plumbers tape to the OD of the insert for a slip/snug fit in your discharge tube.
This insert also works in other electronic dispensers such as the Lyman and Hornady units.
The video is 43g Varget.http://youtu.be/ApkPJug5W_U
Now comes with additional small sleeve for even more accuracy for an extra $4
Downside is it slows the toss down about 10 seconds over the normal insert (42g H4350). Guys are having very excellent results with these. They idea is to give the option of choking down small for when you want to be as precise as possible and aren't worried about the extra time.