North Texas Ordnance is now offering barrel crowning services
Drop your muzzle on your rifle and cause damage, no problem!
Have a nasty burn you just want cleaned up, no problem
Have a questionable factory crown and want to eliminate that as a potential accuracy issue, no problem!
We now have the ability to either offer straight or 11 degree target crowns
- 11 degree
- cut down and re-crown
offered as well
- 5 Business day turnaround
from receipt of firearm, barreled action, or barrel only - Guaranteed! (Crown service only)
Currently available calibers for services based off bore diameter for rifles and pistols
mm (All), 7
mm (All), .30
Cal (All), .338
mm , .45
Pistol If you don't see your caliber listed or have want to know if we can perform work on your firearm, shoot us a PM and inquire
Above is a Marlin Model 60 22LR, notice the poor factory crown
Same Marlin Model 60, halfway through the process. We could stop here if the customer so desired as the crown is refinished at 11 degrees at this point.
Marlin Model 60, after finished crown and outside chamfer (optional service)
Here you can see the dish on the 11 degree target crown on the same Marlin Model 60
Notice how obvious the rifling now is compared to before
This is a (optional) polishing service we offer which also protects from rust for up to 3 months.
We currently do not offer re-bluing however will offer it in the future.
Pricing:-Re-crown Only (Target or Flat) $45
-Re-crown with outside chamfer $50
-Re-crown with outside chamfer and polished finish $60
-Cut, Re-crown (Target or Flat)$60
-Cut, Re-crown with outside chamfer $65
-Cut, Re-crown with outside chamfer and polished finish $75 Introductory offer - First 10 new customers receive $10 off all services!!!
PM me to add your name to the list for $10 off
10.Please PM me with any questions or inquiries