Here are a couple of knives I built from bar stock. These knives are Aldo's 1/8" thick 1084, but that's where the simplicity stops. The knives are hardened to 60 RC in a digitally controlled oven, then finished out with a 400 grit hand finish and a thin tapered tang. One is pink G10 with black G10 liners, and the other is red Kirinite. OAL is 6 1/4" with a 2 1/2" blade. The sheaths are my work as well, from Wickett and Craig leather. The two knives are so similar that the sheaths are interchangeable, so first come, first served. I built these for color/flash and to hit a price point for a show, and had an award winning mother of pearl frame handle dagger on the table as well. Price is $140 each, or $250 for both, TYD, paypal preferred.