Ground Fill Feeders

Our ground fill feeders are built out of 14 gauge sheet and 1/8" wall angle iron, much thicker than any mass produced feeder on the market. Varmint cages are made with 7 gauge horse panel and are very sturdy. Prices include a West Texas Feeder Supply 12 Volt control unit with "THE Timer", we can add a solar panel for $40 more and also the eliminator plate for an additional $40.

300 Lb. Ground Fill - Frame only - $185
300 Lb. Ground Fill - Complete - $400
450 Lb. Ground Fill - $525
600 Lb. Ground Fill - $600
1,000 Lb Ground Fill - $900

Quad Pod Stands

Our quad pod decks are built using 14 and 11 gauge tubing and 3/4" expanded metal. One man stands measure 36"x36", two man stands are 36"x72". Standard pricing includes 8' legs, boat seat swivel pedestal and fixed rails, no actual seat included. An adjustable front rail can be added for an additional $50. Additional length on legs can be added up to 14' for $25/ft.

One Man Quad Pod - $300
Two Man Quad Pod - $350

Box Blind Towers

Towers are made from 12 and 14 gauge 1.5" square tubing, no angle iron is used anywhere on the structure. Custom sizes, porch sizes, etc available. Standard porches are 24" deep and run the whole width of the rear part of tower. Stairs are made of 6" C purlin with 1" square tubing as the handrail. PM for more details and a quote on custom stuff.

5' Tall Towers

4'x4' w/ladder - $300
4'x4' w/porch - $350
4'x4' w/stairs and porch - $450

4'x6' w/ladder - $400
4'x6' w/porch - $475
4'x6' w/stairs and porch - $575

10' Tall Towers

4'x4' w/ladder - $400
4'x4' w/porch - $475
4'x4' w/stairs and porch - $675

4'x6' w/ladder - $500
4'x6' w/porch - $575
4/x6' w/stairs and porch - $875

Duck Blinds

Blinds are made out of 14 gauge tubing, and can come in a variety of different styles. Prices start at $300 for a 3 man blind with push gate and concrete remesh for brushing. PM for more info or a quote on a custom blind.

High Racks

Built with 14 gauge tubing and 3/4" expanded metal. Racks start at $450, PM for a quote on a custom.
_________________________
Custom Hunting/Outdoor Products
Dealer for West Texas Feeder Supply with "THE Timer"!

www.facebook.com/r2metalworks/

www.threecurl.com