Forums46
Topics537,948
Posts9,730,983
Members87,051
|
Most Online25,604 Feb 12th, 2024
|
|
|
Homemade feeder question
#5725711
05/02/15 12:11 AM
|
Joined: Apr 2015
Posts: 840
kmkellar
OP
Tracker
|
OP
Tracker
Joined: Apr 2015
Posts: 840 |
After looking at pricing on new feeders I've decided I can build my own for far less. All in, parts will cost me about $100 and the labor is free. (If you don't count the cost of beer) My question is this, they're going to be 55 gallon food grade drums, is a funnel absolutely necessary, or is it more of a recommendation?
"A free people ought not only be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government." -- George Washington
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5725733
05/02/15 12:29 AM
|
Joined: Aug 2010
Posts: 60,296
stxranchman
Obie Juan Kenobi
|
Obie Juan Kenobi
Joined: Aug 2010
Posts: 60,296 |
No, a funnel is not necessary but after you have to clean it out every so often if you don't put one in. If you leave that corn down around the bottom edges for a couple of years it will break from ever building one without a funnel after that. Nasty is all I can say
Are idiots multiplying faster than normal people?
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5725765
05/02/15 12:59 AM
|
Joined: Apr 2015
Posts: 840
kmkellar
OP
Tracker
|
OP
Tracker
Joined: Apr 2015
Posts: 840 |
A bit of fermentation?
"A free people ought not only be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government." -- George Washington
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5725804
05/02/15 01:37 AM
|
Joined: Sep 2012
Posts: 15,973
Jimbo1
THF Celebrity
|
THF Celebrity
Joined: Sep 2012
Posts: 15,973 |
Spend $20 at Basspro for an adjustable funnel, you wont regret it.
FJB - Lets Go Brandon BBB - Bring Back Better Awake - Not Woke!
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5725805
05/02/15 01:38 AM
|
Joined: Aug 2010
Posts: 60,296
stxranchman
Obie Juan Kenobi
|
Obie Juan Kenobi
Joined: Aug 2010
Posts: 60,296 |
More corn sitting to long. Then getting brown bugs and weevils in it that turn it to powder. It then turns to mush or sludge. Might even get a few maggots in it.
Are idiots multiplying faster than normal people?
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5725818
05/02/15 01:45 AM
|
Joined: Apr 2015
Posts: 840
kmkellar
OP
Tracker
|
OP
Tracker
Joined: Apr 2015
Posts: 840 |
Ok. No desire for maggot infested corn. Material price just went to $120.
"A free people ought not only be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government." -- George Washington
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5725903
05/02/15 03:15 AM
|
Joined: Oct 2010
Posts: 20,988
BuckRage
THF Celebrity
|
THF Celebrity
Joined: Oct 2010
Posts: 20,988 |
It also helps with the flow of the corn. Ime it sometimes tends to clog at the opening without a funnel. I went with steel funnels.
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5727763
05/04/15 02:25 AM
|
Joined: Sep 2009
Posts: 3,906
n-all
Extreme Tracker
|
Extreme Tracker
Joined: Sep 2009
Posts: 3,906 |
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5731152
05/06/15 10:59 AM
|
Joined: Aug 2012
Posts: 315
Chris001
Bird Dog
|
Bird Dog
Joined: Aug 2012
Posts: 315 |
Also it will stop throwing corn when it gets low....it builds up and empties right at the hole.
Chris
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5731287
05/06/15 01:26 PM
|
Joined: Jan 2007
Posts: 3,811
TxAg
Extreme Tracker
|
Extreme Tracker
Joined: Jan 2007
Posts: 3,811 |
As stated, go with a galvanized metal funnel. You'll be happy you did in the long run.
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5731385
05/06/15 02:34 PM
|
Joined: Sep 2012
Posts: 950
YellowDog
Tracker
|
Tracker
Joined: Sep 2012
Posts: 950 |
I found a lid to a Weber grill on the side of the hwy. Have been using it for a funnel for a long time
Born to Hunt/Fish
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5733076
05/07/15 03:43 PM
|
Joined: Jul 2013
Posts: 2,778
Gone to Texas
Veteran Tracker
|
Veteran Tracker
Joined: Jul 2013
Posts: 2,778 |
I didn't put a funnel in my homemade feeders. I drilled holes in the bottom of the 55 gallon drum so water can leak out, haven't had a problem with spoiled corn.
Having said that, I have some thin scrap metal lying around and have been thinking about making a funnel.
|
|
|
Re: Homemade feeder question
[Re: Gone to Texas]
#5733516
05/07/15 08:59 PM
|
Joined: Oct 2010
Posts: 20,988
BuckRage
THF Celebrity
|
THF Celebrity
Joined: Oct 2010
Posts: 20,988 |
I didn't put a funnel in my homemade feeders. I drilled holes in the bottom of the 55 gallon drum so water can leak out, haven't had a problem with spoiled corn.
Having said that, I have some thin scrap metal lying around and have been thinking about making a funnel. you will get corn accumulation and rotting around the edges of the bottom of the barrel from sitting there so long that can't fall through the center hole and onto the spinner plate. It's not for water. No way to get around it except a funnel plus it feeds a little "smoother"
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5736595
05/10/15 12:52 AM
|
Joined: Aug 2007
Posts: 2,969
thorn4570
Veteran Tracker
|
Veteran Tracker
Joined: Aug 2007
Posts: 2,969 |
never used s funnel. Never had a problem with rotted corn etc. only time that happened was when I used s plastic lid and critters chewed a hole it and it rained and corn molded.
I like for there to be a little corn left in the bottom of my barrel in case I show up and forgot to fill barrel. I just shake and a it and a little falls out.
I once drank muddy water out of a hoof print and was dang glad to get it.
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5743463
05/14/15 01:30 PM
|
Joined: Sep 2011
Posts: 350
Texmel
Bird Dog
|
Bird Dog
Joined: Sep 2011
Posts: 350 |
I have always used funnels in feeders that I've built. You're gonna have corn along the feeder sides if yhou don't have funnel. They are not expensive.
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5745725
05/15/15 10:22 PM
|
Joined: Nov 2009
Posts: 100
R. Johnson
Woodsman
|
Woodsman
Joined: Nov 2009
Posts: 100 |
I have built probably 10 and don't use funnels. I do insist on a metal lid with a 3-4 inch lip. It keeps out any rain or moisture and the vibration of the spinner when it throws, prevents build up. Keep corn in "em and they work great!
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5750847
05/19/15 06:37 PM
|
Joined: Apr 2006
Posts: 907
bholt
Tracker
|
Tracker
Joined: Apr 2006
Posts: 907 |
USE A FUNNEL. Do it right the first time. No matter whether you use metal or plastic funnel. I build Winch feeders all the time and have never had a customer complain about the HCR plastic funnel. It is very thick but no matter which way you go you will end up with a "gooder" result, and be happier in the long run.
B Holt Shoot-em in the ear
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5751843
05/20/15 01:15 PM
|
Joined: Apr 2015
Posts: 840
kmkellar
OP
Tracker
|
OP
Tracker
Joined: Apr 2015
Posts: 840 |
Bought the funnels yesterday.
"A free people ought not only be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government." -- George Washington
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5752010
05/20/15 02:51 PM
|
Joined: Oct 2011
Posts: 3,161
SouthWestIron
Veteran Tracker
|
Veteran Tracker
Joined: Oct 2011
Posts: 3,161 |
Bought the funnels yesterday. You'll be glad you did!
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5752583
05/20/15 09:15 PM
|
Joined: Jan 2013
Posts: 19,652
Pitchfork Predator
THF Celebrity
|
THF Celebrity
Joined: Jan 2013
Posts: 19,652 |
Before you cut the legs you should strongly consider a stand and fill. If you put a pen around it you don't need to elevate it to where you have to use a ladder. Just put a good coon cage around the bottom of the barrel. Much safer feeder to fill and less material.
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5752595
05/20/15 09:25 PM
|
Joined: Apr 2015
Posts: 840
kmkellar
OP
Tracker
|
OP
Tracker
Joined: Apr 2015
Posts: 840 |
http://texashuntingforum.com/forum/ubbth...ers#Post5746946Legs are already cut. I made the height so that the top of the barrel will be at 7' and I stand at over 8' on my pickup bed. The motors are Primos Vaults so, according to their website, I shouldn't have to worry about coons getting it off the feeder plate. I guess time and experience will tell if that's or not. I'm setting em up at the lease this weekend with cams, so we'll see how they're doing in about a month.
"A free people ought not only be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government." -- George Washington
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5752795
05/20/15 11:34 PM
|
Joined: Jan 2013
Posts: 19,652
Pitchfork Predator
THF Celebrity
|
THF Celebrity
Joined: Jan 2013
Posts: 19,652 |
If you have hogs they will destroy it eventually without a pen around it. You could always make a door panel to back your truck into. This is another good reason to shorten the legs so you can just build a good strong pen and not worry about using your truck bed or a ladder. Been there and done it many times your way and ends up costing alot of time and money when they knock it over usually when it's full or corn. Good luck.
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5753465
05/21/15 01:04 PM
|
Joined: May 2007
Posts: 5,498
TX_LT230FH
THF Trophy Hunter
|
THF Trophy Hunter
Joined: May 2007
Posts: 5,498 |
I have three of the Primos Vaults. Two have been ruined by coons. They work and work on the feeder plate until they weaken the spring. The other has a screen around it and is still working.
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5756113
05/23/15 04:07 AM
|
Joined: Sep 2009
Posts: 5,396
Pittstate
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Sep 2009
Posts: 5,396 |
http://texashuntingforum.com/forum/ubbth...ers#Post5746946Legs are already cut. I made the height so that the top of the barrel will be at 7' and I stand at over 8' on my pickup bed. The motors are Primos Vaults so, according to their website, I shouldn't have to worry about coons getting it off the feeder plate. I guess time and experience will tell if that's or not. I'm setting em up at the lease this weekend with cams, so we'll see how they're doing in about a month. I have several of the Primos Vaults and they work awesome with a few adjustments. 1) Where the base and motor housing come together with wing nut/bolt, put silicone in the gap, so corn doesn't fall in there. If coons see the corn, they will stop at nothing to get it. I also silicone where the base screws onto the bottom of the feeder. 2) Make sure to set out some duke dog proof traps with corn in them for bait this time of year. Coons will find the corn on the ground and come. The traps will catch a couple and then keep them away. I trap them for a couple months and it keeps them away for a long time. In cold months, they seem to come back and it is time to set them again. 3) Once a year, let all the corn run out of the feeder and take the bottom section off, and grease the spinner shaft. I use spray silicone grease. I have 3 feeders with this setup/maintenance and they have been going for 3 years with zero problems. You will be amazed at how much corn you don't go through since coons are spinning the plate and wind isn't blowing it away as well. If all the feeders on your place are done like this, the coons learn very quick that there is no easy meal. If you have a couple feeders that are like most where the coons can see the corn on the plate, they will continue to attack your primos vaults because they know there is corn and the motors is the key to releasing it. Don't under estimate them coons, they are smart.
|
|
|
Re: Homemade feeder question
[Re: kmkellar]
#5757997
05/25/15 01:31 AM
|
Joined: Apr 2015
Posts: 840
kmkellar
OP
Tracker
|
OP
Tracker
Joined: Apr 2015
Posts: 840 |
Ok, Primos Vault guys, I need help! On all three feeders, I have adjusted the height of the motor, I adjusted the spin speed and I'm still getting a TERRIBLE throw. A 5' radius at best. What else can I try? I've given up for today, but am gonna go mess with em again in the morning.
"A free people ought not only be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government." -- George Washington
|
|
|
Moderated by bigbob_ftw, CCBIRDDOGMAN, Chickenman, Derek, DeRico, Duck_Hunter, hetman, jeh7mmmag, JustWingem, kmon11, kry226, kwrhuntinglab, Payne, pertnear, rifleman, sig226fan (Rguns.com), Superduty, TreeBass, txcornhusker
|