Did they publish what the update is supposed to do?
I've mentioned this a few times to ATN (revision logs) and I don't find one for any thus far.
For those of you evaluating the new firmware I just spoke with the tech representative and I can tell you this much.
The selection of 3x vs 5x is critical to operating BDC as implemented on the x-sight the selection obviously needs to match you scope and basically it effect calculations based on variances of the lens types.
The blue T will remain stationary and represents your original point of aim (zero) and you'll notice the reticle now floats based on your orientation and handling of the scope I.e. Realtime ballistic calculation and movement of crosshairs.
The only way to know if it works and is effective will be at the shooting range so report back here if you have the ability to stretch out the gun and vary your elevations.
In my opinion I believe the feature is more geared towards the daytime use of the x-sight as it is primarily designed as a day optic BUT that's not to say that it won't have a use at night 100 yards and in ...
Instructions will be published in the future for how to change your wifi ssid and password to something unique.
That's all from here, back home to TX tomorrow.