Looking to sell 10.5'
tall hunting stand with a 6'+
square top section
Blind was 20' tower and cut to just above crossbeam support resulting in 6'+ square platform.
Stand has been reinforced and is super strong.Stand spec's:
legs: 1.5" square tubing.
Stand top: angle iron w/ 1.5" tubing bolted to each piece.
Ladder & landing platform: 1.5" tubing, angle iron , & 3x4 expanded metal, landing is reinforced & braced
stand base width: just under 10' each side
Original build was all welded, after cut, attached by drill and bolt using iron from top half. Blind specs:
( blind purchase is optional
4'X8'X6.5' sloped to 6'ish
2' top top side door ( after cutting used a 4' side as door as picture shows position)
Metal roof with plywood pieces underneath
3 chairs & carpet inside
plexiglass sliding windows w/ exterior hinged plywood sunshields
blind comes apart easily
Here's the deal. Lease land is being bought and everything needs to be off by January 7th,
next Wednesday. All we have left of issue is this stand.
for stand and $250
for the blind. Cash only. Will listen to OBO and discuss reasonable offers on both or stand only. If no deal we're moving it to other property next door. Low balls won't work as got place to move it to, just easier to sell stand at a fair cost straight out.
Lease is in southern Medina County 8 miles south of D'hanis between 2200 and Deer Creek rd.
Will be at lease on Tuesday doing final loading and moving. If no sale by then it goes across the property line. If bought can come within 50' of stand due to thorns and we'll load you up.
Stand and landing ladder & platform are ideal for a 6' or 8' long blind.
Call or text (210) 215-3877