Well since you bumped it.
How about some epoxy on the bullet AND a crimp on the brass to help hold the bullet in place. If you have a drill press, make a vee block that will hold the brass to drill holes through the brass laterally. Go to the harware store and find the scews you like and the hex nuts to match. You'll need screws the diameter of the brass + the offset you want off the drawer + the thickness of the drawer in length. Need three hex nuts per screw, to sandwich the brass between the screw head and nut, then two more nuts to hold the offset from the drawer.
800 Yard Steel Rifle Range
Long Range Shooting Instruction
Memberships and Classes Available