Barrel threading on sale for 50 out the door. This price is for the barrel being dropped off or shipped to me. If I have to take the gun down its $15 more.Edit:
** We thread using 3 jaw chuck, 4 jaw chuck or spider/cathead. Just depends on the job.**
IF its a bolt gun the barreled action is fine, just take stock and scope off and its a flat $50 bucks.
If I have to disassemble the gun it must be an 10/22, AR15, AR10, or Remington 700.
If you send in the barrel only I can do most any rifles.
We only thread on insider diameter and will be concentric to the bore (so ready for your silencer, muzzle brake, etc)
Turnaround is very fast, will average 2 days.
This sale is for all normal right hand threads (1/2x28, 5/8x24 etc). We can do all threads, but costs a little more.
If you need it cut down, recrowned and threaded then its $65 out the door.
IF you live too far to drive to DFW area I can send your gun back to you for $10.
Can do paypal with no fees added as well.
If interested message me here, but for a faster response in most cases email me
Here is a pic of putting the 11 degree target crown on one after I threaded it.