Forums46
Topics537,786
Posts9,729,151
Members87,042
|
Most Online25,604 Feb 12th, 2024
|
|
|
Primers
#7089104
02/22/18 09:23 PM
|
Joined: Sep 2010
Posts: 843
DuckKiller2010
OP
Tracker
|
OP
Tracker
Joined: Sep 2010
Posts: 843 |
Where do you Fort Worth folks buy primers?
Need Federal 215's and no one has them. Ordering them is expensive as hell due to HazMat fee.
Thanks,
|
|
|
Re: Primers
[Re: DuckKiller2010]
#7089106
02/22/18 09:24 PM
|
Joined: Sep 2009
Posts: 18,935
ChadTRG42
THF Celebrity
|
THF Celebrity
Joined: Sep 2009
Posts: 18,935 |
I waited over 1 1/2 years for a recent Fed 215 primer shipment!!
|
|
|
Re: Primers
[Re: DuckKiller2010]
#7089153
02/22/18 09:47 PM
|
Joined: Sep 2009
Posts: 18,935
ChadTRG42
THF Celebrity
|
THF Celebrity
Joined: Sep 2009
Posts: 18,935 |
For your 7 Mag, the Federal 215 and Remington 9 1/2 M primers are the 2 hottest primers. A CCI #250 would also work, but is slightly less hot. A standard primer will "work", but I would recommend a magnum primer with a slower burning powder. I know shooters who use a standard primer for their magnum cases, and they work fine.
|
|
|
Re: Primers
[Re: DuckKiller2010]
#7089242
02/22/18 10:34 PM
|
Joined: Jun 2011
Posts: 33,946
Buzzsaw
THF Celebrity
|
THF Celebrity
Joined: Jun 2011
Posts: 33,946 |
if you change primers you have to run a 20/5 shot group ladder test to find a new load sorry but that's the only way to find your NODE
|
|
|
Re: Primers
[Re: Buzzsaw]
#7089343
02/22/18 11:28 PM
|
Joined: Jan 2009
Posts: 19,234
Judd
#1 Creedmoor Fan
|
#1 Creedmoor Fan
Joined: Jan 2009
Posts: 19,234 |
if you change primers you have to run a 20/5 shot group ladder test to find a new load sorry but that's the only way to find your NODE Really?
Don't let your ears hear what your eyes didn't see, and don't let your mouth say what your heart doesn't feel
|
|
|
Re: Primers
[Re: Buzzsaw]
#7092263
02/25/18 02:29 PM
|
Joined: Nov 2010
Posts: 154
240z
Woodsman
|
Woodsman
Joined: Nov 2010
Posts: 154 |
if you change primers you have to run a 20/5 shot group ladder test to find a new load sorry but that's the only way to find your NODE This is why I read this forum, for the intertainment value.😁
Harley Davidson Motorcycles.....the most efficent way to convert gasoline into noise, without the side effects of Horsepower.
|
|
|
Re: Primers
[Re: ChadTRG42]
#7092303
02/25/18 03:06 PM
|
Joined: May 2014
Posts: 1,100
TackDriver
Pro Tracker
|
Pro Tracker
Joined: May 2014
Posts: 1,100 |
For your 7 Mag, the Federal 215 and Remington 9 1/2 M primers are the 2 hottest primers. A CCI #250 would also work, but is slightly less hot. A standard primer will "work", but I would recommend a magnum primer with a slower burning powder. I know shooters who use a standard primer for their magnum cases, and they work fine. Just to clarify,,,the Rem primers seat softer than the Federal and CCI primers. The brass pockets were still tight with other primers except Rem primers. I think the Rem primer diameter is a little smaller if I am not mistaken. I just feel a lot less pressure when seating Rem primers, does anyone else feel the same?
Last edited by TackDriver; 02/25/18 03:17 PM.
|
|
|
Moderated by bigbob_ftw, CCBIRDDOGMAN, Chickenman, Derek, DeRico, Duck_Hunter, hetman, jeh7mmmag, JustWingem, kmon11, kry226, kwrhuntinglab, Payne, pertnear, rifleman, sig226fan (Rguns.com), Superduty, TreeBass, txcornhusker
|